A PDF booklet is your document rearranged so that, printed on both sides and folded in half, it reads like a small book. You do not need special software: this page does the rearranging and tells you exactly how to feed the paper.
How to print a booklet on a home printer
Most printing trouble comes from one setting: which edge the printer flips the paper on. For a booklet it has to flip on the short edge. If it flips on the long edge, every back side comes out upside down.
If your printer prints both sides
- Open the booklet PDF and choose Print.
- Set the paper to the size you picked (A4 for an A5 booklet, Letter for half Letter).
- Turn on two-sided printing and choose flip on short edge.
- Set scale to 100% or “Actual size”, not “Fit to page”.
If it prints one side at a time
Choose “One side at a time” above. The booklet comes out as two passes. Print pass 1, put the printed stack back into the tray without changing its order, turned the way the guide shows for your printer, then print pass 2. Not sure which way your printer feeds paper? Print a two-page test first: mark the top of the first sheet with a pencil before pass 2 and you will see how the printer turns it.
How it works
Printers call this imposition. A 16-page booklet is four sheets nested inside each other, so the outer sheet carries pages 16 and 1 on the front and 2 and 15 on the back. The tool works out that order for any page count, places two pages side by side on each sheet and scales them to fit. Pages are moved, not re-rendered, so text and vector graphics stay sharp.
Everything happens in your browser. The PDF is opened in memory, rearranged and saved back to your device. Nothing is sent to a server, which is why there is no file size limit other than your device’s memory.
What people use it for, and when it will not work
Zines and comics, event programs, recipe booklets, children’s stories, instruction manuals, church and wedding programs, short story collections for an e-reader-free afternoon.
- Long documents. More than about 40 pages (10 sheets) will not fold flat and will be hard to staple. Split the PDF into parts of 32 or 40 pages and make a booklet from each.
- Creep. In a thick booklet the inner pages stick out slightly after folding. This tool does not shift pages to compensate, so keep important content away from the outer edge.
- Landscape pages are rotated and scaled down to fit the half sheet, so small text gets smaller.
- Password-protected PDFs need to be unlocked first.
Which paper size to choose
Pick the paper you have in the printer. Your pages are scaled to the booklet size: an A4 document printed as an A5 booklet is reduced to 71%, about the same as reading a paperback. If the text becomes too small, a booklet of A4 pages on A3 paper keeps it at full size.